Beads knife / cutter carbide bead / DIY Tools / ball diamond polished axes dedicated
Terrible for the rosary 1.5MM knife , you must use 1.8 polished axes. The rosary is 2.0MM terrible knife , you must use 2.2 polished axes. We will according to your choice of beads knife , to give you with a good polishing corresponding axis , pro feel comfortable buying.
Beads tools to use:
1 . Equipment requirements ; hand drill , bench drill , engraving machine , polishing sandpaper, wood wax , polish shaft and so on.
2 First sawn planks specifications you need , such as machining diameter 50MM sphere , then the plate thickness is 50MM. Be sure to keep wood formation,
3 . The boards fixed on the table , installed the tool , first drill a hemisphere , and then turn the sheet metal processing to the other side of the sphere .
4 balls for processed wood polishing , try sanding to your desired effect .
5 out of ordinary wood wax to good effect , if any, beeswax better.
Alloy Tool Caution:
Alloy Tool main processing relatively high hardness of the material, in the process need to pay attention to some processing issues :
1 of the tool speed must be reasonable , usually speed is 1000-1500 .
(2) must ensure that the processing of sheet metal flat , otherwise prone to drill down , or processing out of the ball is not round phenomenon.
3 Do not use screws clamp the tool finally stepped up , likely to cause partial drill equipment ,
4 beads to do is to go through after the polishing process , so the selection of the tool should be used when a bigger tool .
5 polished beads need to use a little better wood wax , polish out of beads can be more perfect .
