woodworking tools for ball/Round pearl

High quality woodworking tool barrel bead knife/bead knife,ball knife quality assurance Blade using carbide Mosaic welding, significantly increased the tool wear resistance degree and hardness, can play high hardness of timber Bead tool is the sole company developed a special bead processing of cemented carbide tool, each specification price different, bead knife process should pay attention to detail:Making the timber of the bead bead thickness and the diameter of the knife, or hit beads is elliptical oh, bead knife is suitable for bench drill, carving machine do wood bead. When doing bead timber should avoid stammer, nailhole objects and so on, or bit easy to fracture. Should choose wood face do beads, such doing texture is the down

杰峰（JEEFOO)佛珠刀使用注意事项
1，一般用于台钻或者手钻，台钻效果更佳，直径15mm以上规格建议使用台钻操作。
2，台钻转速要求：
直径14mm以下规格转速在2000-3000
直径15mm-20mm规格转速在1500-2500
直径22mm以上在800-1500，您可根据实际操作情况调整加工转速。
3，板材料厚度比刀具直径要1mm为最佳，板材需表面平整，两板面之间呈水平平行状态，否则打出来的珠子容易错误，边角料建议加垫片辅助加。
4，刀具装夹一定要牢固，锁螺丝的台钻在装夹时一定要对正中心。
5，钻头的作用是打孔和定位，所以换钻心时，安装钻心需要调整好机米螺丝，保证钻心在刀具的中心，给珠子打磨抛光时，如没有抛光轴，可以用钻心代替抛光轴来使用。
6，珠子后续需要打磨抛光等处理工艺，在选购佛珠刀时相应要购买大一点的佛珠刀，留点加工余量进行抛光和打磨。

佛珠加工方法如下：