1, will not collapse knife.
2, long service life, high processing efficiency, low unit cost.
Diamond sintered knife use instructions:
1. For the above materials, drilling, reaming, polishing, lettering and so on.
2. Machined parts must be added coolant, such as water or cutting fluid.
3. Diamond tool hard and brittle, the use of non-collision process.
4. Long-term use, knife-edge blunt, need to lightly click on the wheel 3-5 times to the blade.
5. Recommended speed 3000-10000 r / min, according to processing requirements appropriate adjustments.
6. Engraving depth of 1-5MM, the proposed amount of feed 1 ---- 3mm, to prevent crushing the workpiece is processed.
